sys chiller_installed chin Platesetter_VLF Trendsetter_VLF Trendsetter_400/800 Trendsetter_400/800_Proofing ThermoFlex For the 1.7x heads (and soon thermal 2) a liquid cooling system is required. This parameter informs the firmware if the unit should be present in the system configuration. With this parameter set to 0 a chiller is not expected and control signals will not be sent - even if the cable is plugged in and the cable detected. The chiller is required to prevent overheating of the laser imaging head. It is normal for the chiller's compressor to be turned on and off as the head requires when used in conjunction with 1.7x heads. Thermal 2 and TFX heads do not yet support (and may never) the commands to do this so the chiller will simply be turned on (pump and compressor) all of the time and left to self regulate. boolean
  • 1
    •
  • 0 to 1
    •      cfg
  • ../nvs/head_cal_casehigh.xmlNVS: head casehigh
  • ../nvs/head_cal_caselow.xmlNVS: head caselow
    •
  • ..\..\ShowAllErrors.htmFirmware 0 Error Index
  • ..\..\ShowAllCommands.htmFirmware 0 Command Index
  • ..\..\ShowAllNVS.htmFirmware 0 NVS Index
    •  Updated: Wed Jul 16 19:37:41 2008 PST